Payment & Shipping Terms:
Mechanical lathe machine CW6280 manual machine/gap bed lathes
This lathe is mainly used for turning face, cylindrical bore, tapered surface, and other rotating body parts, process various commonly used metric, inch, module and pitch threads, and can bear drilling, nesting, boring and other technology.
1. Bed with large double width sidewall ribs, the inner ribs and diagonal ribs with box-shaped composite structure, the overall stiffness than the single-walled door-shaped rib structure to improve third.
2. Centralized control, slide plate has a fast moving body with single handle visualize manipulation; spindle reversing conversion and brake hydraulic control.
3. Lathe structural stiffness and transmission stiffness were higher accuracy and stability, and can carry heavy cutting.
4. Bed rail down surface using TSF wear inlay layer structure, motion light and flexible, long life; lubrication system for the circulation outside the box to improve the machining accuracy.
5. Spindle hole 105mm (C type is 130mm); processing length is 1500mm, 2000mm, 3000mm, 5000mm and so on. Tailstock with dials and engraved lines, using an intuitive; Overall neat appearance, easy to clean and maintain.
Welcome to check the web: http://mao.ecer.com/test/zxlathe.com/supplier-131554-cw6280-lathe-machine
please send your inquiry to email@example.com
CW6280 horizontal gap lathe machine Main technical parameters
|Maximum workpiece swing diameter over bed||mm||800|
|Maximum workpiece length||mm||1500|
|Maximum workpiece swing diameter over carriage||mm||480|
|Turning diameter in the saddle||mm||1100|
|Effective width In the saddle||mm||310|
|Spindle bore diameter||mm||φ105|
|Spindle head form||D11|
|Front spindle taper hole diameter||mm||φ120|
|Front spindle Taper||MT No.5#|
|Spindle speed range||r/min||5.4~720|
Longitudinal feed rate
|Longitudinal feed progression and scope||mm/r||
|With a range of micro feed change gears||mm/r||0.06-0.912|
|On turret maximum stroke||mm||200|
|Below turret maximum stroke||mm||450|
|Taper of tailstock sleeve||MT No.5#|
|Tailstock sleeve maximum stroke||mm||250|
|Saddle rapid traverse||mm/min||4000|
|Machine screw pitch||mm||12mm( Metric);1/2”( Inch)|
|Processing Metric thread range and kinds||mm||50kinds,1-240( Another 14 kinds of non-standard thread)|
|Processing Inch thread range and kinds||Teeth / inch||26 kinds,14-1|
|Module thread range and kinds||mm||53 kinds,0.5-120|
|Processing thread pitch range and kinds||DP||24 kinds,28-1|
|Bed rail width||mm||600|
|Main motor power||kw||11|
|Fast motor power||kw||1.1|
|Coolant pump motor power||kw||0.09|
Before shipment machines would be painted with rust-proof oils and packed at first with water-proof material carefully and attentively.
Wooden cases are made of fumigated material and special ordered according to different machine size. Suitable for land and sea transport.
All the seaport of the wooden cases or machine parts will be strengthened and fixed with wire ropes, bandages, wedges and other necessary tools in good quality, in order to avoid the lean over, movements of machine during the shipment.
We hope to deliver our machine with good quality to worldwide customers and partners safely.
CW6280 horizontal gap lathe machine Pictures
Xingtai Zhenxing Machinery Manufacturing Co.Ltd was founded in August 28th, 1990.
We specialized in manufacturing lathe machine, like CW6163 lathe, cw6280 lathe, cw61100 lathe, cw61125 lathe,cw61160 lathe, cw61200 lathe machine. Our products have obtained a high visibility, reliable quality by domestic and foreign customers. In the past years, the lathe machine had been exported to Thailand, Indonesia, Vietnam, Peru, Mexico and so on.
In the face of new challenge, “ Zhenxing” will continue to develop innovation and concerted efforts” of this idea for more users. We sincerely welcome new and old friends, domestic and foreign customers to visit us , to achieve mutual benefit and common development.
Welcome to visit our factory anytime sincerely !